HookeRoad Tacoma Front & Rear Bumpers Combo for 2016-2022 Toyota Tacoma 3rd Gen

Hooke Road Front & Rear Bumpers Combo(16-22 Toyota Tacoma 3rd Gen)


Like to Join in Discount List
Save 12%
Original Price $1,209.99
Current Price $1,069.99



P.O. Box Address is not available. Please Offer the physical address on checkout.

 
Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now
 

Hooke Road Installation Manual

Name: Hooke Road Toyota Tacoma Front & Rear Bumper Combo

    * Friendly Reminder :

    • Please Double-check All of the Item Pictures to Purchase What you Like


    Toyota Tacoma Front Bumper
    Fits 2016-2022 Toyota Tacoma 3rd Gen Models; Cutting Required; Not Compatible w/Factory Sensors
    Bumper Weight: About 141 lbs; Built-in winch plate – only fits advanced wireless remote operate winch without a manual clutch handle. Rated up to 12,000 pounds.  High Strength D-Ring Mounts Welded Both Inside and Out with 4.75-Ton Capacity. 9500 lbs Rated,3/4" D-Rings w/Rubber Ring for Reducing Friction & Crashing With Bumper; Come with a Light Mounting Port for a 31.5" LED Light Bar; Heavy-Duty, High Tensile 11-Gauge(1/8 Inch) Maximum Steel for the Bumper Main Body, 8-Gauge(11/64 Inch) Maximum for the Structure Mounting Bracket; 3-Piece Design Full-Width Front Bumper; Protects Vehicles from On & Off-Road Debris; Audacious, Angular Off-Road Design with Low-Profile Hoop; Textured Black Powder Coat
    Moderate Installation Requires Trimming of The Factory Bumper & Cutting Required
    Package Included

    • 1 x 3rd Gen Toyota Tacoma Full Width Front Bumper w/Winch Plate
    • 4 x 18W LED Spotlights
    • 4 x D-rings w/Rubber Ring
    • Mounting Hardware

     * The item includes two packages: Package A & Package B


    2016-2022 Toyota Tacoma Gen 3 HR Rear Bumper w/License Plate Bracket

    Fit for 2016-2022 Toyota Tacoma 3rd Gen Models; Compatible with Factory Back-Up Sensors
    Bumper Weight: About 53 lbs
    Heavy Duty 11-Gauge(1/8 Inch) Maximum Steel Construction
    Textured Black Powder Coat Finish
    One-Piece, Fully-Welded Structure
    Works with Factory Receiver Hitches
    Pre-Drilled Holes for Back-Up Sensors to Fit Properly. Not Compatible with Blindside Sensors. Professional Installation Is Recommended
    License Plate Mounting Bracket Included; Pre-Formed Cut-Outs to Accommodate Factory License Plate Lights
    Rear Bumper Provides Adequate Front-End Protection
    Integrated Corner Side Steps for Convenient Truck Bed Access
    Simple Bolt-On Installation w/Detailed Instruction; No Cutting Required to Install


    Package Included

    • 1 x Tacoma Rear Bumper w/License Plate Mounting Bracket
    • 2 x 18W LED Floodlights
    • Mounting Hardware

      Dimension
      Manual Measure. There is a little bit difference. Just for Reference Only.

      Toyota Tacoma Front Bumper 3rd Gen

      Hooke Road Toyota Tacoma Front Bumper and Rear Bumpers Combo for 2016-2020 Toyota Tacoma 3rd Gen u-Box Offroad BXG42014200
      2016-2022 Toyota Tacoma Gen 3 HR Rear Bumper w/License Plate Bracket

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      More Customer Gallery on Instagram: #hookeroad