HookeRoad Ram Rear Bumper w/LED Lights for 2009-2018 Dodge Ram 1500

Hooke Road Turable Rear Bumper w/LED Lights(09-18 Dodge Ram 1500)

Like to Join in Discount List

P.O. Box Address is not available. Please Offer the physical address on checkout.

Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now

Hooke Road Installation Manual

Name: Hooke Road 2009-2018 Dodge Ram 1500 Durable Rear Bumper w/LED Lights

  • Please Double-check All of the Item Pictures to Purchase What you Like


  • Fits 2009-2018 Dodge Ram 1500 Models
  • Bumper Weight: About 76 Lbs
  • Sleek Look and Enhanced Protection
  • Heavy Duty 9 Gauge(5/32 Inch) Steel Construction
  • 9500 Lbs Rated,3/4'' D-Rings Included
  • Integrated Steps For Easy Access to Bed
  • Textured Black Powder Coat Finish
  • Retains Factory Receiver Hitch
  • Not Compatible With Factory Back-Up Sensors
  • D-Rings w/ Rubber Rings To Provide Extra Protection Against Abrasion
  • Easy Bolt-On Installation

Package Included

  • 1 x Dodge Ram Rear Bumper
  • 2 x D-Rings
  • 2 x 18w LED Spotlights
  • Mounting?Hardware

Intense and Styled Protection. A basic Dodge Ram rear bumper offers simple protection and maybe a little bit of style. Upgrading to this Dodge Ram Rear Bumper takes protection and style to the next level. The bumper is designed to look sleek and sharp. It has integrated lighting for a high-end appearance. At the same time, it is made to offer more extreme protection to your rig?¡¥s rear.

High-Quality Construction. Manufactured from heavy-duty 5/32" steel plating for strength, this Dodge Ram Front Bumper is cold-formed into shape. After trimming and final finishing then completes their Bumper in a two-stage finish using epoxy pre-coating and high-grade textured black powder coating for durability and long-lasting corrosion resistance.

E-Coating Process.E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the-art performance and decorative effects. The product percent of pass reaches 100% after the salt spray test.

Easy Installation. Install is 100% bolt-on, with no drilling, welding, or cutting necessary. Assemble three parts to be a rear bumper and install the bumper onto the car frame. This bumper also preserves the function of the dual-rear-exit exhausts. Get some hand tools together and give yourself about an hour to get the job done.

SEMA Membership. Our Brand has been certified as a member of SEMA. We are studious and gradually grow up to be a professional aftermarket retailer. As a SEMA member, we make, buy, sell and use all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again.Wish you have a terrific off-road experience with our products.

Customer Reviews

Based on 4 reviews
Vince Kiconco
Awesome look

Was worried it was not going to work. Had to use two different bolts and washers. My truck frame must have been bent a little for original bolts to line up.

Kade Franecki

I love the look but won't buy. Why would you not include licence plate lights? Most, if not all, require these.

Toke Bamisebi
Fits with some added parts

This bumper does not fit a 2016 RAM LTD. However, I added a 1 inch steel spacer (4 count) and 1 inch longer bolts (4 count). I also cut 1/4" of the back of the bumper brace to prevent the bumper from rubbing on the factory frame mounted hitch. The bumper does not have the cutout for the license plate lights. I am debating cutting the bumper to use the existing light fixtures OR adding an LED license plate holder. I'm not sure there is room for the holder because the bumper design has a slit to insert the bottom of the license plate rather than the usual bolt holes. In Texas, the license plate must be illuminated at night. Lastly, the LED Floodlights are useless without a wiring harness. This too can be resolved by purchasing a wiring harness from a third-party vendor. The bumper functions well for my pickup and use on our property.

vuyokazi Thomas
Easy Install

Install this bumper by myself (62 y.o. fat man) put one corner On Loosely bolted, put the other Corner On Loosely bolted, installed middle section adjusted and tightened. Took about an hour.

More Customer Gallery on Instagram: #hookeroad