Jeep Flat Rear Fender Flares (18-23 Jeep Wrangler JL) - Hooke Road

Jeep Flat Rear Fender Flares (18-23 Jeep Wrangler JL) - Hooke Road

Like to Join in Discount List

P.O. Box Address is not available. Please Offer the physical address on checkout.

Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now

Hooke Road Installation Manual

Name:  Jeep JL Flat Rear Fender Flares

Add extra protection to your JL, while improving its style, with a set of Hooke Road Rear Fender Flares. Featuring a flat fender design, these Flares will open up your Wrangler's wheel wells for a more aggressive off-road appearance. These Flat Flares not only provide additional tire coverage to protect your rig from flying debris, but they also give you a little extra room when upgrading to a beefier set of tires.



Jeep Wrangler JL Flat Rear Fender Flares
Vehicle Service Type

Fits for:

2018-2023 Jeep Wrangler JL


Hooke Road





Installation Time

‎About 1.5 hours, 2-3 people may be needed.



  • Aggressive angular flat fender flares that make your vehicle out of the crowd.
    Provides additional tire coverage
  • Provides extra protection from road debris. Features a width of 3.6-inch on the top of the fender flares  
  • Heavy-duty 16-gauge(1/16 inch) steel plate for the fender, and 11-gauge(1/8 inch) steel for the mounting brackets.
  • Textured black powder coat finish & Premium E-coating process inside



Jeep Flat Rear Fender Flares  (18-23 Jeep Wrangler JL)  dimension
Jeep Flat Rear Fender Flares  (18-23 Jeep Wrangler JL)  dimension 2

  •  Product weight: about 32 lbs
  • Moderate bolt-on installation. Some drilling is required. Tools require a drill with a 9 mm drill bit.

What's in the box

  • Rear Fender Flares(Driver and Passenger Sides)
  • Rubber Strips ×2
  • Mounting Hardware Kit
  • Installation Instruction


Heavy-Duty Construction. Manufactured for maximum durability, these Hooke Road Flares are crafted from 1.5mm thick carbon steel plate allowing them to take on anything the trail throws at them. These Flat Fender Flares are finished in a 2-stage epoxy pre-coating and high-grade, textured black powder coating for durability and long-lasting corrosion resistance.

Moderate Installation with Drilling. Some drilling is required to complete a firm installation. Need to drill the mounting holes and insert rivet nuts with the rivet nut tool. Please prepare tools including a drill with a 9 mm drill bit. With the drilled holes ready, place the fender flares and tighten up with the supplied bolts. The installation could be completed in about 1.5 hours depending


      Customer Reviews

      Be the first to write a review

      More Customer Gallery on Instagram: #hookeroad