HookeRoad Tacoma Front & Rear Bumpers Combo for 2016-2022 Toyota Tacoma 3rd Gen

Hooke Road HR Front & Rear Bumpers Combo(16-23 Toyota Tacoma 3rd Gen)

Like to Join in Discount List

P.O. Box Address is not available. Please Offer the physical address on checkout.

Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now

Hooke Road Installation Manual

Name: Hooke Road Toyota Tacoma Front & Rear Bumper Combo

    * Friendly Reminder :

    • Please Double-check All of the Item Pictures to Purchase What you Like

    2016-2023 Toyota Tacoma Gen 3 Front Bumper

    Fit for 2016-2023 Toyota Tacoma 3rd Gen Models
    Bumper Weight: About 69 lbs
    One-Piece Design Stubby Front Bumper; Exciting Off-Road Styling. Delicate Hollowed-Out Honeycomb Design on Both Sides.
    Heavy Duty, High Tensile 11-Gauge(1/8 Inch) Steel for the Bumper Main Body, 8-Gauge(11/64 Inch) for the Structure Mounting Bracket
    High Strength D-Ring Mounts Welded Both Inside and Out with 4.75-ton Capacity. 9500 lbs Rated, 3/4'' D-Rings Included
    License Plate Mounting Bracket Included; Comes with 2×18w Cube LED Spotlights and a 90W LED Spotlight Bar(19.3 in)
    Not Compatible with Factory Sensors
    Textured Black Powder Coat Finish
    Simple Bolt-On Installation. No Drilling or Cutting Required

    Package Included:

    • 1 x Tacoma Front Bumper w/License Plate Mounting Bracket
    • 2 × Mounting Bracket
    • 2 × D-rings
    • Mounting Hardware

        2016-2023 Toyota Tacoma Gen 3 HR Rear Bumper w/License Plate Bracket

        Fit for 2016-2023 Toyota Tacoma 3rd Gen Models; Compatible with Factory Back-Up Sensors
        Bumper Weight: About 53 lbs
        Heavy Duty 11-Gauge(1/8 Inch) Maximum Steel Construction
        Textured Black Powder Coat Finish
        One-Piece, Fully-Welded Structure
        Works with Factory Receiver Hitches
        Pre-Drilled Holes for Back-Up Sensors to Fit Properly. Not Compatible with Blindside Sensors. Professional Installation Is Recommended
        License Plate Mounting Bracket Included; Pre-Formed Cut-Outs to Accommodate Factory License Plate Lights
        Rear Bumper Provides Adequate Front-End Protection
        Integrated Corner Side Steps for Convenient Truck Bed Access
        Simple Bolt-On Installation w/Detailed Instruction; No Cutting Required to Install

        Package Included

        • 1 x Tacoma Rear Bumper w/License Plate Mounting Bracket
        • 2 x 18W LED Floodlights
        • Mounting Hardware

          Manual Measure. There is a little bit difference. Just for Reference Only.

          2016-2021 Toyota Tacoma Gen 3 Front Bumper
          2016-2021 Toyota Tacoma Gen 3 Rear Bumper

          Customer Reviews

          Be the first to write a review

          More Customer Gallery on Instagram: #hookeroad