HookeRoad Jeep JK Rear MOAB Inner Fender Liners for 2007-2018 Jeep Wrangler JK

Hooke Road® Rear MOAB Inner Fender Liners Black Steel(07-18 Jeep Wrangler JK)


Like to Join in Discount List
Save 22%
Original Price $179.99
Current Price $139.99



P.O. Box Address is not available. Please Offer the physical address on checkout.

 
Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now
 

Hooke Road Installation Manual

Name: Hooke Road Jeep JK MOAB Rear Inner Fender Liners


Feature
  • Fits All 2007-2018 Jeep Wrangler JK Models; Do not fit 2018 Jeep JL
  • Weight: About 26 lbs
  • Product Dimension: 34.33" x 14.46"(Length x height)
  • Made From High Strength Steel
  • Gravel And Muddy Water Fender
  • Black Powder Coat Finish
  • Decorated w/MOAB Character and the Coordinate of Latitude and Longitude
  • Both Driver and Passenger Side Liners Included
  • Moderate Installation: If the rear fender hinders the installation, please uninstall the rear fender and install it.
Package Included
  • 1 x Jeep JK Rear MOAB Inner Fender Liners(Driver & Passenger Side Included)
  • Mounting Hardware

Fitment

Fit for
2007/2008/2009/2010/2011/2012/2013/2014/2015/2016/2017/2018
Jeep Wrangler JK 2/4 Door Rubicon/Sahara/Sport X

About the Moab insert

Moab is cut out and there is a white plate on the behind. You can remove the rivets, take the white plate and dye it. 

Dimension

Excellent Protection and Stylish Look
If you're searching for a quick and easy way to improve your 2007-2018 Jeep Wrangler JK appearance, simply install our Jeep JK Rear Inner Fender Lines Kit. The high-quality Jeep JK Rear Inner Fender Lines Kit is able to dramatically improve the look of your Jeep's rear wheel wells so that your Jeep easily stands out from the pack in the streets and on the trails. The solid construction of these inner fenders provides exceptional rear wheel protection from rocks, road debris, and other contaminants. 
Solid Construction
These Jeep JK Rear Inner Fenders Lines feature a solid steel construction that gives it exceptional durability ideal for rough off-road driving. A durable black powder-coated finish is applied to give these inner fenders increased resistance to corrosion and rust. 
E-Coating Process
E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the-art performance and decorative effects. The product percent of pass reaches 100% after the salt spray test.
Installation
These Jeep JK Inner Fender Liners are designed for a direct bolt-on installation. No drilling or trimming is needed for proper installation. Just place the Jeep JK inner fender liners and tighten up with supplied screws. The kit should take 60 minutes or less to get them down. Attempt to complete the operation in your garage and save you a pretty penny ranges from 100 to 500 dollars.

Customer Reviews

Based on 12 reviews
17%
(2)
33%
(4)
50%
(6)
0%
(0)
0%
(0)
J
Jeremy
Only 1 way to install these

2018 JKU. Start with the bottom right bolt. You will need a wrench (crescent/open side) to hand tighten. Next connect the top right bolt. Tighten to leave just enough give as you need a bit of wiggle room but you most likely will not be able to tighten it later. Finally you will need a crow bar/wonder bar to pry up the bottom left side so the holes line up. You will definitely need a 2nd person to either hold the bar or put the bolt/nut on. Tighten everything. There is no possible way you are connecting the top left bolt so just come to terms with that or this is not the product for you. Also you will probably never get this out so be sure it's the look you are going for.

L
Leanna Parisian
Looks good but hard to install

These inner fenders give the Jeep a nice look but installation makes you wonder if it was worth buying it. These comes with installation directions that are not the best to follow. The front ones were not bad to install then you go on to install the rear ones and good luck. The alignment does not work on all holes and it is almost impossible to hold the washer and the nuts while trying to put the bolts. Due to the unclear directions and difficulty to install these I am only rating them a 3 out of 5.

R
Rosalee Doyle
Great looking product!

I love the look of these inner rear fenders. Installation was fairly easy on the driver side. However the passenger side was a pain. The holes at the top of the fenders just did not line up and the rear corner kept popping out when tightened. As long as you know how to adjust and improvise. You should be fine. Installation took me about 3 hours.

J
Judy Neary

This is a Christmas gift so I am unable to come T at this time

G
Gideon Africa
Provides good protection but difficult to install.

I liked the steel over the stock plastic. New guards are hard to line up inside wheel wells. Good quality for the price.

More Customer Gallery on Instagram: #hookeroad