HookeRoad Toyota Tacoma Rear Bumper w/18W LED Floodlights for 2016-2022 Toyota Tacoma

Hooke Road Rear Bumper w/18W LED Floodlights(16-22 Toyota Tacoma)


Like to Join in Discount List
Save 29%
Original Price $699.99
Current Price $499.99



P.O. Box Address is not available. Please Offer the physical address on checkout.

 
Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now
 

Hooke Road Installation Manual

Name: Hooke Road Tacoma Discovery Rear Bumper

Feature
  • Fits 2016-2022 Toyota Tacoma Models; Not Compatible with Blind Spot Sensors; The trailer hitch receiver needs to be disassembled to install the bumper
  • Rugged Styling and Protection
  • Heavy-duty, high tensile 10 gauge (9/64 inch) & 8 gauge(11/64 inch) steel construction
  • Texured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use
  • 9500 lbs rated, 3/4'' D-rings included
  • D-rings w/ rubber rings to provide extra protection against abrasion
  • License plate mounting plane included
  • Not compatible with factory back-up sensors
  • Bumper weight: about 76 lbs
  • Bolt-on installation w/ clear and detailed instruction
Package Included
  • 1 x Toyota Tacoma Discovery Rear Bumper
  • 2 x 18W High Power LED Floodlights
  • 2 x D-Rings
  • Mounting Hardware
Upgraded Protection and Styling. When suiting up for off-road battles, don't forget about your Tacoma rear protection. Consider getting the u-Box Trucks Rear Bumper, which comes with reinforced D-ring mounts and D-rings for off-road recoveries. You'll be ready for any off-road eventuality with this bumper on your back.
Heavy Duty Construction. Designed for a bolt-on installation, this front bumper is CNC-cut, formed, and MIG/TIG-welded to perfectly fit on your Tacoma.
E-Coating Process. E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the-art performance and decorative effects. The bumpers can last for 100 hours during the salt spray test which is equivalently to have a 5-year corrosion capacity. The product percent of pass reaches 100% after the salt spray test.
Installation. With the help of the supplied detailed instruction, the procedure is demonstrated step by step to help you finish the installation. You should expect to take up to 1 hour installing this unit, based on your level of mechanical skills. Attempt to complete the operation in your garage and save you a pretty penny ranges from 100 to 500 dollars.

      Customer Reviews

      Based on 4 reviews
      25%
      (1)
      75%
      (3)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      P
      Pirzada Srinivasan
      Poor packaging and lack of information

      Nice product. Only complaints are packaging/shipping. It came with eyelets sticking through the box and had been drug across floor damaging textured finish. Also instructions where wadded up in tape for hardware. Have tried to get information on aftermarket backup sensor kit that will work with this bumper and have not received response. Information sheet also wadded up in tape and unreadable. Misinformation in Amazon product questions. People are mistaking back up sensor system with blind spot system. This bumper has holes for back up sensors but is not compatible with blind spot system. I have not confirmed if factory back up sensors fit as my truck is not equipped with them

      K
      Keagan Bednar
      Es buen material y resistente

      Bueno

      A
      Adriana Willms
      not quite

      bumper did not fit on 17 tacoma, 1/4 inch too narrow at the mounting bracketled back up lights do not come with a wiring harness and one was not recommended with purchaselicense plate lights are not flushtrailer connector does not make a solid connection due bumper thicknesslooks good on the truckheavy and nicely powder coated

      I
      Ikenna Abosede
      Somewhat Disappointed!

      The Overall Bumper itself is great HOWEVER it was stated on their website that the bumper would accommodate BSM sensors but it does not!! So therefore, I had no choice but to sacrifice that feature. In addition, the hole for the license plate light is too big and it is very difficult to find a light that will fit the 1 1/2鈥?diameter.

      More Customer Gallery on Instagram: #hookeroad