HookeRoad Tacoma Sensors Rear Bumper Replacement for 2016-2022 Toyota Tacoma 3rd Gen

Hooke Road HR Rear Bumper w/License Plate Bracket(16-22 Toyota Tacoma 3rd Gen)


Like to Join in Discount List
$499.99



P.O. Box Address is not available. Please Offer the physical address on checkout.

 
Offroad Life 4x4 Enthousiast
Offroad Life Enthousiast · Trucks & Wrangler Mods
Join in Now
 

Hooke Road Installation Manual

Feature
  • Fit for 2016-2022 Toyota Tacoma 3rd Gen Models; Compatible with Factory Back-Up Sensors
  • Bumper Weight: About 57 lbs
  • Heavy Duty 11-Gauge(1/8 Inch) Maximum Steel Construction
  • Textured Black Powder Coat Finish
  • One-Piece, Fully-Welded Structure
  • Works with Factory Receiver Hitches
  • Pre-Drilled Holes for Back-Up Sensors to Fit Properly. Not Compatible with Blindside Sensors. Professional Installation Is Recommended
  • License Plate Mounting Bracket Included; Pre-Formed Cut-Outs to Accommodate Factory License Plate Lights
  • Rear Bumper Provides Adequate Rear-End Protection
  • Integrated Corner Side Steps for Convenient Truck Bed Access
  • Simple Bolt-On Installation w/Detailed Instruction; No Cutting Required to Install

Package Included
  • 1 x Tacoma Rear Bumper w/License Plate Mounting Bracket
  • 2 x 18W LED Floodlights
  • Mounting Hardware

 Just for ReferencDimension

Manual Measure. There is a little bit of difference. Just for Reference.

 

Rugged Styling and Protection. Does your 2016-2021 Tacoma pull double duty on the street and on the trails? If so, you may want to replace that inferior stock Tacoma Rear Bumper 3rd Gen with one that can handle the extra abuse. The Tacoma Rear Bumper Replacement will provide excellent protection from all kinds of off-road hazards all while giving your Tacoma rugged off-road styling. Featuring integrated high power LED lighting, this heavy duty Tacoma Rear Bumper 3rd Gen is perfect for those who don't shy away from adventure.

 

Robust Build Quality. This Tacoma Rear Bumper 3rd Gen features a high-grade steel construction ensuring it can take the knocks of regular off-roading. Moreover, this Tacoma Rear Bumper Replacement assembly is machine-formed and completely welded for added strength, as well as an accurate fit. Lastly, this bumper receives a specialized textured black powder-coat finish for maximum corrosion protection.

 

E-Coating Process. E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the art performance and decorative effects. The product percent of pass reaches 100% after the salt spray test.

 Just for Reference

 

Easy Bolt-on Installation. The Tacoma Rear bumper is engineered to be a direct bolt-on installation for your. As a direct fit replacement, this Rear bumper requires no additional cutting or fabrication for installation.

 

SEMA Membership. We has been certified as a member of SEMA.We are studious and gradually grow up to be a professional aftermarket retailer. As a SEMA member, we make, buy, sell and use all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again. Wish you have a terrific off-road experience with our products.

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
D
Dave Sanders
3 stars at best, some design flaws that should be fixed

I purchased this bumper roughly a year ago from Hooke Road online for my 2018 TRD Sport Tacoma. It came securely packaged on time without issue along with all necessary hardware to install it. The included LED lights are very bright and using marine-grade crimp connectors and 14ga wire I had laying around, I ran them to a relay and switch. They work wonderfully for backing up late at night and do not bright out the back up camera at all on the tail gate. What's nice about this bumper, it works with the factor trailer hitch, it includes a handy swing up mount for your license plate that doubles as a cover plate for the trailer wiring connector, it has side foot steps (why Toyota didn't include these OEM like so many others so is beyond me, as this was the primary reason I wanted an aftermarket bumper). The powder coat finish seems to be holding up to wear and tear just fine after one year. The cons : my truck does not have the back up or blind spot sensors in the rear so the included hole cut outs in the bumper were just open. For the price you pay, it would be very nice for Hooke Road to include four cheap plastic fitted caps so the bumper doesn't look horrible upon install. After emailing them back and forth, their E-support staff offered a discount on a future purchase but that did not fix the small issue. Perhaps it's me, but I feel something so small that really makes or breaks the bumper should be included. I went to Home Depot and got four 7/8" plastic caps and used clear silicone. Problem solves. The aggravation of it really rubbed me the wrong way. Next, the cut out for the wiring harness of the trailer plug sits horizontal on the OEM bumper and is closer to the driver's side, on this bumper the cut out is vertical and an inch or so too far. I had to cut some of the zip ties to give more play in the wire trunk to get the whole harness over to the new point and it was stretched to it's max. Very poor engineering. Lastly, and perhaps most important, the square'd off foot step cut outs on either side are barely large enough for a child's shoe let alone your average grown man's work boot to fit into. I wear a size 11 boot and the tip of it barely fits into the opening, again, very poor engineering. As such, I cannot give more than three stars to the overall quality of the purchase. I only hope their engineering and sales dept takes heed of these very simple to fix issues. Sad to say this was the only aftermarket bumper with side steps that I found for our late model Tacos. Overall, once it's on it does look very nice. The included bolts hold it in place and it slid right onto the frame properly, so good job there. It was relatively easy to snap in the OEM plate lights too. If I was to do it over, I'd hire a local fabrication shop and pay the money up front, it's clear this bumper is not made in America either, but only so many options. I hope this review helps others in their search as it is up front and honest about the product.

More Customer Gallery on Instagram: #hookeroad