Hooke Road Tundra Bumper Buyer's Guide

At Hooke Road, we specialize in designing high-quality bumpers and accessories specifically for the 2nd Generation Toyota Tundra. Following the truck's significant mid-cycle update in 2014, we've categorized our products into two distinct fitment ranges to ensure a perfect match: 2007-2013 and 2014-2021.

Here’s a breakdown of the key differences between these two model years that directly impact bumper compatibility and design:

1. Front Grille & Headlights:

07-13 Models: Feature a narrower, more vertical grille and headlight assembly.
14-21 Models: Underwent a major front-end redesign with a wider, more horizontal grille and larger, swept-back headlights. This is the most significant factor requiring different front bumper designs between the two generations.

2. Front Fender & Hood:

To accommodate the new front-end style, the 2014+ models have revised front fenders and a hood with a different contour. This affects how the bumper's wings integrate with the body.

3. Fog Lights & Sensors:

The size, shape, and mounting points for fog lights often differ between the two generations.
For newer models, bumper designs must also consider potential integration points for parking sensors and other driver-assist features.

4. Bumper Mounting Points:

While the core frame structure is similar, the specific bumper bracket designs and mounting points were updated in 2014 to suit the new bodywork. A Hooke Road bumper is engineered to bolt directly onto the factory mounting points for your specific year range.

Front & Rear Bumpers for 2014-2021 Tundra

SKU	DESIGN	FEATURES
HE.5000		Built-in winch plate 3 pieces design 4 LED spotlights 2 x D-rings Not Compatible with Blind Spot Monitoring System
HE.5001		2 Spotlights+1 light bar comes with skid plate 3 pieces design 2 x D-rings Not Compatible with Blind Spot Monitoring System
HE.5009		1 × License Plate Mounting Bracket 4 × LED Spotlights Built-in winch plate Compatible with factory parking sensors 3-piece modular design
HE.5010		Not compatible with front parking sensor 4×25W LED spotlights 3-piece modular design a flip-up license plate mount Built-in winch plate
HE.5003		Can't work with OEM Back-Up Sensors 2 x 18W LED spotlights 2x D-Rings Pre-cutout for trailer connector Retains factory hitch receiver Works with factory license plate light. 3-piece modular design

Front & Rear Bumpers for 2007-2013 Tundra

HE.5200		Not Compatible with Factory Sensors a skid plate a winch plate 2 x D-Rings 4 x 18w LED Spotlights 1 × License Mounting Bracket 3-piece modular design
HE.5204-1		A skid plate 2 x 18w LED Spotlights 3-piece modular design
HE.5205		4 x 18W LED spotlights included A winch plate Not Compatible with Factory Back-Up Sensors 3-piece modular design
HE.5209		3-piece modular design 2 x 18W LED spotlights A License Plate Mounting Bracket
HE.5211-S		3-piece modular design 4×18w LED spotlights A winch plate A skid plate
HE.5201		3-piece modular design A license plate light 2×18W LED floodlights Retains Factory Hitch Receiver Not Compatible with Factory Back-Up Sensors Pre-cutout for trailer connector
HE.5206		3-piece modular design Works with factory receiver hitch A license plate light 2×18W LED floodlights Pre-cutout for trailer connector Not compatible with factory back-up sensors

A Final Note on Compatibility & Installation

Before finalizing your bumper and winch selection, please keep two critical points in mind:

Winch Compatibility: Our front bumpers with winch plates are designed to accommodate a wide range of winches, but not all models will fit. Beyond the weight rating, the physical size and location of the winch control box are crucial factors for compatibility. For a detailed guide, please refer to our dedicated article: What Winch Will Be Compatible With Your Off-road Bumper?
Parking Sensor Holes: Not all of our bumpers come with pre-drilled holes for parking sensors. If this feature is essential for you, please confirm the bumper's specifications before ordering. For bumpers without sensor holes, we recommend having the holes drilled professionally at a local auto shop. While DIY is possible, it requires precise measurement and mechanical skill. If you are unsure, please consult our customer service team before proceeding with installation.