Reviews

Ordered this rear bumper a few weeks ago for my 2020JL. It fits well on the frame and looks great. Unfortunately when I tried to close the tailgate with the stock spare on it, it wouldn't close so I removed the spare until I can get some spacers for it. Installing the rear plate light was a breeze, but I didn't install the pod lights yet, as I plan to operate them on their own separate switch.

Absolutely love how beefier my truck looks. Took me and my dad about 3 hours for removal and install.

I now own the Tailgate Basket Rear Cargo Rack w/ Reinforced Tailgate Hinge Kit for my 2013 Jeep Wrangler JK, the interior rear cargo rack which has already proven so useful and the HR roof rack to truly utilize all my space. I’ve used all three recently on a camping trip and they did not disappoint. Thanks y’all.

Gave my jeep a warrior look

Quick shipping, box was damaged from shippers, D loops missing, bull bar is attached with 2 little bolts. But is still better that the uj flat bumper, winch fits nice.

I bought the rear inner fenders for my JK to clean up the appearance and for added protection. I love em. They look great and fit perfectly. I highly recommend them.

Replaced 2016 JK OEM chrome runners. Fast delivery. Packed well, no damage. Fit up perfect. 4 nuts/side n done...easy install. I added flat washers to the Jeep stock nuts, cuz holes on running boards are slightly large. Lowers my step up by a helpful 4" vs OEM chrome brds. Very sturdy, good quality product, clear instructions. Highly recommend Hooke Rd!

I was a little skeptical at first ordering these doors for the price but I must say I am pleasantly surprised, they are pretty heavy duty and well made with a nice rugged coating. They took about an hour of assembly and adjustment to get the fit tight but it was not difficult in the least

Rack is great and easy to install. Also, customer service was great when I originally ordered the wrong item. Thank you

I bought this bumper a month ago. Looks really good on my truck. The only problem I have with it is the light bar had condensation and water in it within a day and there was no rain. Since it has rained it has accumulated alot of water. It is a sealed unit so no way to open it to remove the water. Bumper is great, but light bar is not good.

Nice quality

They fit perfectly!!!

The bumper came in perfect condition, no scratches or dents. It went together easily, but the instructions were lacking a bit. There was room for a 1200Lb Bad Lands winch, but had to relocate the controller. I’m still working on figuring out how to put my bumper parking sensors into the one I bought. I would’ve appreciated some instruction there.

Bumper was pretty easy to install only needed help to hold it in place while i got the bolts in fitment is good I have fender flares that cover ware the corners meet the fender so it looks perfect. The coating was rubbed on in some areas and I'm sure it will start to rust if I don't address that. But I live on a remote island so it is what it is. I did not install a winch and if your looking to do some serious winching, I would look for something more sturdy the plate seems thin for all the weight but I'm sure it would be fine for the occasional recovery. Lights were wired to existing fog light harness. I had basically the same bumper from hooke road before but for a Tundra and it was great finishing held up great besides the lights they got water in them at some point but after over a year. The Tundra one came with a skid plate this one dose not and it kinda makes the front look a bit bare but it will be easy to make one myself also they use to come with the shackles.

After the factory bumper was basically disintegrated from rust i live near the ocean I had to upgrade wow makes my truck look way better fitment was perfect super easy install like the side steps built in didn't hook up the lights yet. I have had several hooke road products now and they make a solid product for the money. Time will tell if the coating will last but judging from my past purchases they hold up pretty good.

Put these on and they work great. Took my rig out the next day, bounced off a rock and they worked exactly as they were supposed to. Couldn’t be happier

Bought these doors for my Rubicon TJ after beating Ng sticker shocked by the price of fabric doors. These were really easy to assemble and after an adjustment to the latch assembly they fit great and are rattle free. They actually block a little of the wind as well. I would recommend getting these if your debating it.

I was rear-ended, and thanks to your product, I truly feel like my life was saved. These are the only damages I sustained, and I’m genuinely impressed with the quality and performance. That said, I believe I’ll need to replace it, as it appears to be bent — but I couldn’t be more grateful.

The look is fantastic. I had mine powder coated silver to match my jeep

Very Easy Install and attaches Great to the Bronco. Carries my 2 Kiaks and traction bords. Made with Strong, Sturdy and Stout Materials.

2018 Jeep Wrangler JK Unlimited.
I bought the rear trunk upper basket with the other interior cargo rack in between. I loved the packaging install was fairly easy. It came with stickers which is always appreciated.

Got this as a Christmas present from my parents and finally put it together when the sun came out. I assembled it completely by myself, so it did take a bit longer than it would’ve with 2 to 3 people. So it is possible to assemble by yourself, it just takes a long time. After installing the foam and all the rubber, it probably took over six hours. If you follow the instructions you should have no problem getting it together. If you don’t read the instructions you will be up Schitt’s creek.

Great bumper for the price. Looks great and I really like it a lot but there were some issues on the install. The directions leave something to be desired to say the least. The front of the truck disassembly was not bad. Lots of videos on the internet. Marking the plastic bumper cover where to cut was a bit challenging. The directions give you a starting and ending point, but no measurement points at all in the middle. I suggest cutting a little below, like a half inch, where the directions show. You can trim later if needed. I used a oscillating tool to cut the bumper cover. It cut like butter. The fender liners are easy to cut and if you push the front of them up you can bolt them to the sheet metal body above for a nice clean look. I had to trim the lower inch or so off of the two black plastic radiator air collecting fins on each side of the radiator for the new bumper mounts to go high enough to slide over the frame bolts. The grill must be installed before you install the bumper! It will not fit after! That said, if you're going to install the winch solenoid behind the grill, like the directions show, it needs to be installed before you put the grill and bumper on. I installed a Badland Apex 12k winch. First, I had to make a bracket to hold the Badland solenoid, which is way larger than the supplied plate. I also mounted it near the top of the radiator grill area for access if it needs replacing or service and to access the winch remote on/off switch and control cord receptacle. Then I had to trim a notch in the small plastic piece that connects the remaining bumper cover plastic and the bottom of the grill to be able to use the free spool lever. The only way to reach the lever is through the hole in the bumper next to the fairlead. If you don't trim a notch in both you cant reach the lever. You surely can't see it at all, even after cutting the notch! I had to make another bracket to hold the main battery disconnect switch next to the battery. I installed a six position fuse and relay box for the small supplied fog lights along with some flood/spot lights I bought them from Suparee. They are really nice and not too expensive. The bumper, winch, relocating the solenoid, installing the disconnect, making the solenoid and disconnect brackets, installing the relays, extra lights and wiring everything took two 12 hours days. I'll be curious to see how the winch plate and bumper hold up to the 12k winch with the truck buried to the doors in mud or pulling up a steep incline. The bumper is like 125 pounds and the winch is around 85 pounds. Once installed it dropped the nose of my 21 Tacoma a half to three quarters of an inch. No too bad. Hope this helps the next guy. It really looks great!

this place isn’t over priced. only saw one person with a hooke road bumper. i was happy. i’m happy about the product. easy install. did it all by myself it fits perfect.

Beautiful product, I get compliments almost everyday